Gas and Specialty Sensors

GDS Series



Product Bar End
Product Bar End

GDS Series

Kele Toxic and Combustible Gas Detectors GDS Series

Kele Toxic and Combustible Gas Detectors

 

The Kele GDS Series Gas Detector is an independent microprocessor-based system. It provides continuous, effective toxic gas monitoring and combustible gas monitoring for building automation systems, BAS. The system detects, senses and monitors gases for environmental safety and control. The GDS Series provides a 4-20 mA output in proportion to the level of gas present and two relay outputs to activate additional horns, strobes, or ventilation systems. The gas detectors feature a functional and flexible design with pre-calibrated plug-in sensors. The unit features a two-line LCD for local indication, self test diagnostics, and a built-in 85 dBA buzzer. The rugged polycarbonate housing is resists rust, corrosion, and dents. When properly installed and maintained, the GDS Series Gas Detector can be used in a control system to prevent the formation of a hazardous environment.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
GDS-DC3H8 C3H8 SINGLE PROPANE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-DCH4 CH4 SINGLE METHANE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-DCO-1 CO SINGLE GAS DETECTOR DUCT MOUNT In Stock1,565.001,252.00
GDS-DH2 H2 SINGLE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-DH2S H2S SINGLE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-DNO2 NO2 SINGLE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-DO2 O2 SINGLE GAS DETECTOR DUCT MOUNT In Stock1,810.001,448.00
GDS-WC3H8 C3H8 SINGLE PROPANE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00
GDS-WCH4 CH4 SINGLE METHANE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00
GDS-WCO-1 CO SINGLE GAS DETECTOR WALL MOUNT In Stock1,050.00840.00
GDS-WH2 H2 SINGLE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00
GDS-WH2S H2S SINGLE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00
GDS-WNO2 NO2 SINGLE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00
GDS-WO2 O2 SINGLE GAS DETECTOR WALL MOUNT In Stock1,300.001,040.00

Accessories

No accessories found
Features
  • Pre-calibrated plug-in sensors
  • Built-in 85 dBA buzzer
  • 4-20 mA and two relay outputs
  • Wide variety of gases detected
  • Two-line LCD display
  • Wall or duct mount
  • Easy installation, commissioning, and operation
  • LED status indication
  • Password protection
  • Programmable relay differential
Specifications

Supply Voltage:17-27 VAC @ 8.4 VA, 50/60 Hz or 24-38 VDC @ 350 mA (E3SAH base unit is 120 VAC only)

Accuracy:±3%

Signal Output:4-20 mA @ 500Ω

Measurement Range:

CO:0-250 ppm

O2: 0% to 25%

H2S:0-50 ppm

N2O:0-10 ppm

CH4,C3H8, H2:0% to 100% LEL

Sensing Technology:

CO, O2, H2S, NO2:Electrochemical

CH4, C3H8, H2:Catalytic combustion

Calibration Interval:6 months

Life Expectancy:

CO:6 years

All Others :2 years

Visual Indication:Green LED: power Amber LED 1: Alarm/fault Amber LED 2: Alarm/fault

Response Time:50 seconds or less

Display:8 character, two-line LCD

Display Resolution:

CO:1 ppm

O2:0.2%

H2S, NO2:0.2 ppm

CH4, C3H8, H2:0.5%

Relay Output: (2) DPDT pilot duty, 150 VA max inductive, 5A @ 30 VDC, 250 VAC

Alarm Auditory Levels [Db]:85 dBA @ 10 ft (3m)

Operating Temperature:

CO: -4° to 122°F (-20° to 50°C)

All Others:-40° to 122°F (-40° to 50°C)

Operating Humidity:15 to 90% non-condensing

Dimensions:8.1''H x 5.9''W x 2.7''D (20.6 x 14.9 x 6.7 cm)

Weight:

Wall:1.84 lb (0.83 Kg)

Duct:7.96 lb (3.61 Kg)

Approvals:ETL

Warranty:1 year

Certifications