{"id":870,"date":"2015-06-02T11:02:33","date_gmt":"2015-06-02T16:02:33","guid":{"rendered":"http:\/\/www.kele.com\/keleblog\/?p=870"},"modified":"2022-03-15T15:12:07","modified_gmt":"2022-03-15T20:12:07","slug":"controls-and-cables-in-environmental-air-handling-spaces-ducts-and-chases","status":"publish","type":"post","link":"https:\/\/www.kele.com\/content\/blog\/2015\/06\/02\/controls-and-cables-in-environmental-air-handling-spaces-ducts-and-chases","title":{"rendered":"Controls and Cables in Environmental Air Handling Spaces, Ducts, and Chases"},"content":{"rendered":"

First, let\u2019s discuss controls and their enclosures in air handling spaces, ducts, and plenums. Many times, we have to install items in these spaces and it\u2019s important to consider that anything we put in there should either be non-combustible (metal) or else be listed under UL 2043 for use in air handling spaces.<\/p>\n

The NEC is what governs this requirement.\u00a0Section 300.22(C)(3) states that, \u201cElectrical equipment with a metal enclosure, or electrical equipment with a nonmetallic enclosure listed for use within an air handling space and having adequate fire-resistant and low-smoke-producing characteristics, and associated wiring material suitable for the ambient temperature shall be permitted to be installed in such other space unless prohibited elsewhere in the code.\u201d An informational note included in the code defines UL 2043 as a permissible standard for such a nonmetallic product.<\/p>\n

Not many plastic items meet this requirement, so it\u2019s best to stick with metallic enclosures. The purpose behind this limitation is that we don\u2019t want smoke to spread via the air handling systems in the event of a fire \u2013 and we certainly don\u2019t want that smoke to originate inside the air handling system.<\/p>\n

UL 2043\u2019s title is Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces<\/em>. Anything combustible (that is, not metal) installed in an air handling space should be listed to this UL standard. Confusion comes in when products have been listed to other flame test standards.\u00a0 A product listed as flame-spread tested to UL 94 V-0 or UL 94 H-2 is NOT the same as UL 2043, and does NOT indicate that the product is suitable for use in air handling spaces. Some inspectors will accept these flame-spread ratings, but of late that number of inspectors is dwindling. They want to see \u201cPlenum Rated\u201d and UL 2043 is the only standard available at this time to apply such a label. UL 94 is a test for flammability only. Smoke is the key to safety in air handling spaces.<\/p>\n

So what\u2019s the do-all solution?\u00a0 Use a metal product, or put your plastic product in a metal box.\u00a0 It\u2019ll never be questioned by an inspector.\u00a0 Temperature sensors like the Kele KT-D<\/a> and Precon ST-D<\/a> are all available with metallic wiring boxes (XH or XW options).\u00a0 Humidity sensors like the KH-D<\/a> and HD-20K<\/a> have metal wiring boxes as well.\u00a0 Stick with these when in-duct or in-plenum mounting is essential.\u00a0 Of course, if in-duct or in-plenum mounting is not essential, don\u2019t mount it in there!<\/p>\n

Now let\u2019s have a look at wiring in air handling spaces and chases. If not in metal conduit, there is a wide range of choices for low-voltage cabling<\/a> \u2013 plenum and chase ratings have been around much longer than UL 2043, so manufacturers have made listed cables for every application. The important thing to take away from this article is that there are two very different ratings available.\u00a0 Plenum rating is one, and chase (riser) rating is another.\u00a0 Be certain that your cable is marked and listed for use in plenums and\/or risers as appropriate. Substitutions may be made according to Table 725.154(G) in the NEC.\u00a0 In general, plenum rated cables can be used in risers, but not the other way around.\u00a0 Kele\u2019s Model CBL<\/a> carries both CL3R and CLP3 ratings and thus can be substituted for almost any application.\u00a0 Here\u2019s a copy of Table 725.154(G), courtesy of the National Fire Protection Association. It illustrates the hierarchy of Class 2 and Class 3 cable types allowed in various spaces:<\/p>\n

\"weigel\"<\/a><\/p>\n