Actuators and Dampers

KA-35 Series



Product Bar End
Product Bar End

KA-35 Series

Kele Revolution™ Direct Coupled Actuator 35 IN-LB Non-Spring Return KA-35 Series

Kele Revolution™ Direct Coupled Actuator 35 IN-LB Non-Spring Return

 

The Kele Revolution™ KA-35 Series actuators are designed and tested to provide damper actuation up to 35 in-lb. They are non-spring return and with a proven track record of long and trouble-free operation. The KA-35 Series is powered by 24 VAC and accepts all control signals, including two-position, tri-state, and proportional. They are especially adept at small VAV control damper operations.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
KA-35-P ACTUATOR 35 IN-LB NSR PROP INFO223.00178.40
KA-35-VAV ACTUATOR 35IN-LB NSR 2POS/TRISTATE In Stock125.00100.00

Accessories

No accessories found
Features
  • Non-spring return 35 in-lb (4 Nm)
  • Stall torque 70 in-lb (8 Nm)
  • Declutch override
  • Two-position and tri-state
  • Proportional 2-10V or 4-20 mA
  • Magnetic motor clutch
  • Over 100,000 cycles nominal
Specifications

Supply Voltage:24 VAC ± 20%, 50/60 Hz

Torque:35 in-lb (4 Nm) non-spring return

Stall Torque:70 in-lb @ 70℉ (8 Nm @ 21℃)

Rotation:90° with indicator

Direction:By switch or wiring

Sound:45 dBA

Cycle Nominal:100,000/1.5 repositions

Housing:NEMA 1 (IP10)

Conduit:None (Open design)

Shaft Diameter:3/8″ to 1/2″ ( 0.95 to 1.27 cm)

Min Shaft Length:1.75″ (4.45 cm)

Manual Override:Declutch lever

Position Indicator:Built in

Feedback:Yes with accessories

Operating Temperature:20° to 125℉ (-7° to 52℃)

Operating Humidity:5-95% noncondensing

Approvals:UL Listed, CSA, CE, plenum rated

Warranty:3 years

Certifications