MOB-4, MOB-8, MR-604/T, MR-608/T
Kele Manual Override Boards
Models MOB-4 and MOB-8 Manual Override Boards are designed to add hand/off/automatic operation to any group of controller outputs. They may also be used as stand-alone override switch banks.
Models MR-604/T and MR-608/T Manual Override Boards with Relays are designed to add on/off/auto operation to any group of controller outputs. They can also be used as stand-alone override switch banks. The onboard relays allow direct switching of loads without the use of external pilot relays.
- MOB-4, MOB-8
- AC or DC operation
- Ability to convert four or eight outputs to hand/off/auto operation
- Wire-captive screw termination
- LED indication
- Feedback monitoring of switch positions
- Snap-track mounted
- MR-604/T, MR-608/T
- Direct load control without external relays
- AC or DC operation
- Ability to convert four or eight outputs to on/off/auto operation
- Wire-captive screw termination
- LED indication
- Snap-track mounted
Supply voltage
MOB-4, MR-604/T:24 VAV/VDC @ 65 mA max (half-wave)
MOB-8, MR-608/T:24 VAC/DC @ 130 mA max(half-wave)
Switching capability
MOB-4/8:1A @ 24 VAC/VDC
MR-604, 608:10A @ 120 VAC, 24 VAC/VDC
Manual controls
MOB-4,8:Hand/Off/Auto toggle switch
MR-604, 608:On/Off/Auto slide switch
Operating temp:-10º to 140ºF (-20º to 60ºC)
Humidity:10% to 95% RH noncondensing
Mounting:Snap-track (furnished)
Dimensions
MOB-4:3.25"H x 3.75"W x 1.6"D (8.3 x 9.5 x 4.1 cm)
MOB-8:3.25"H x 7.5"W x 1.6"D (8.3 x 19.1 x 4.1 cm)
MR-604/T:3.25"H x 4.25"W x 1.2"D (8.3 x 10.8 x 3.1 cm)
MR-608/T:3.25"H x 8.5"W x 1.2"D (8.3 x 21.6 x 3.1 cm)
Weight
MOB-4, MR-604/T:0.4 lb (0.2 kg)
MOB-8, MR-608/T:0.8 lb (0.4 kg)
