Kele Isolated DC to DC Transmitter
The Model DT13E is a signal isolator that accepts a current or voltage input and provides a linearly transferred current or voltage output. The input and output are electrically isolated, making the DT13E useful for ground-loop elimination, common-mode signal rejection and noise pickup reduction. The Model DT13E is designed to function effectively in electrically noisy environments. The DT13E can interface with recorders, data loggers, personal computers, programmable controllers, HVAC controllers, building automation controllers, variable speed drives, and other process monitoring and control systems. Snap-track is included for easy mounting.
- Eliminates ground loop wiring problems
- Multiple input/output ranges are jumper selectable
- 24 and 120 VAC powered models
- Snap-track mounting for easy installation
- Low cost
Input/Output:0-20 mA, 4-20 mA, 0-5V, 1-5V, 0-10V, 2-10V, 0-15V, or 3-15 VDC jumper selectable
Input impedance
Voltage:5 VDC: 20 kΩ, 10VDC: 13.3 kΩ;15VDC:12 kΩ
Current:20mA: 125Ω max
Output capability, both models
Voltage:15 VDC, 6 mA max current loading
Current:20 mA DC, 650Ω max load
Output zero/span:Up to 20% offset to the 0-20 mA, 0-5V, 0-10V, and 0-15V ranges.
Isolation:1000V (DC or AC peak) max
Linearity:Better than 0.5% of span
Response time:70 ms typical
Ambient operating temp:14º to 140ºF (-10º to 60ºC)
Humidity:5% to 95% noncondensing
Power
DT13E-24:24 VAC ±10% 50/60 Hz, 12 VA
DT13E-120:120 VAC ±10% 50/60 Hz, 6 VA
Dimensions:2.25" H x 5" W x 1.25"D (5.7 x 12.7 x 3.2 cm)
Weight:0.65 lb (0.3 kg)
Warranty:1 year
