Network and Wireless

BA/RCV-EZ and BA/RPT-EZ



Product Bar End
Product Bar End

BA/RCV-EZ and BA/RPT-EZ

BAPI Wireless Receiver and Repeater BA/RCV-EZ and BA/RPT-EZ

BAPI Wireless Receiver and Repeater

 

The BAPI BA/RCV Wireless Receivers detect the radio signals from sensor transmitters or BA/RPT repeaters and send the value through a hard-wired RS485 bus to dedicated output modules. Each receiver can accommodate 127 output modules, which come in a variety of output types including thermistor simulation (10K Ω type 2 or 3), 4-20 mA, 0-5 VDC, 0-10 VDC, and solid-state switch. The BA/RCV418 receives signals directly from sensor transmitters at 418 MHz. The BA/RCV900 receives signals only from repeaters at 900 MHz. The BAPI BA/RPT Wireless Repeater detects all 418 MHz and repeated 900MHz transmitter signals, and re-transmits the signal at 900 MHz to extend useable wireless distance to 1000 feet open air. These signals are received with a BA/RCV900 for RS485 communication distribution to the output modules.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
ALC/DS6R ALC DRY SWITCH MONITOR 30K OUTPUT INFO10,000.008,000.00
ALC/DS8 ALC DRY SWITCH MONITOR 30K OUTPUT INFO10,000.008,000.00
ALC/FOX ALC FIBER OPTIC COMMUNICATION KIT INFO10,000.008,000.00
ALC/RCV418EZ ALC 418 MHZ RECEIVER INFO10,000.008,000.00
ALC/RPT49-EZ ALC WIRELESS REPEATER 418-900MHZ INFO10,000.008,000.00
ALC/TRK01 ALC TRK - TR2 SNAPTRACK 1.3IN INFO10,000.008,000.00
ALC/TRK02 ALC TRK - TR2 SNAPTRACK 2IN INFO10,000.008,000.00
ALC/TRK04 ALC TRK - TR2 SNAPTRACK 4IN INFO10,000.008,000.00
ALC/TRK08 ALC TRK - TR2 SNAPTRACK 8IN INFO10,000.008,000.00
ALC/TRK12 ALC TRK - TR2 SNAPTRACK 12IN INFO10,000.008,000.00
ALC/TRK18 ALC TRK - TR2 SNAPTRACK 18IN INFO10,000.008,000.00
ALC/TRK48 ALC TRK - TR2 SNAPTRACK 48IN INFO10,000.008,000.00
BA/DS6R DRY SWITCH MONITOR 30K OUTPUT INFO123.1998.55
BA/EZ-RCV418 RECEIVER,418 MHZ,DIN INFO327.70262.16
BA/RCV900-EZ RECEIVER,900 MHZ,DIN In Stock659.41527.53
BA/RCV900-EA-EZ RECEIVER,900 MHZ,EXT ANT,DIN In Stock648.93519.14
BA/RPT49-EZ 418-900 MHZ,REPEATER,DIN In Stock795.28636.22
BA/FOX-KIT FIBER OPTIC COMMUNICATION KIT INFO568.42454.74
BA/RCV418-ENET WIRELESS RECEIVER 418MHZ W/ETHERNET OUTPUT INFO1,538.611,230.89
BA/RCV418-USB WIRELESS RECEIVER 418MHZ W/USB OUTPUT INFO1,049.06839.25
BA/RCV418-EZ 418 MHZ RECEIVER In Stock365.41292.33
BA/RCV900-ENET WIRELESS RECEIVER 900MHZ W/ETHERNET OUTPUT INFO1,958.241,566.59
BA/RCV900-USB WIRELESS RECEIVER 900MHZ W/USB OUTPUT INFO1,818.361,454.69
BA/RPT49-EA-EZ WIRELESS REPEATER 418-900MHZ EZ EXTENDABLE ANTENNA INFO938.96751.17
BA/RPTR RS-485 REPEATER INFO272.57218.06
BA/RPTR-KIT RS-485 REPEATER COMMUNICATION INFO420.01336.01
BA/SRBP-TRK ETA LINE INFO73.7258.98
BA/TRK02 TRK - TR2 SNAPTRACK 2IN INFO9.857.88
BA/TRK08 TRK - TR2 SNAPTRACK 8IN INFO22.1117.69

Accessories

No accessories found
Features
  • Eliminates point wiring
  • FCC license pre-approved
  • Receivers accommodate 127 output modules each
  • Receiver sensitivity -106 dBm minimum
  • Built In error detection
  • Repeater transmit power 100 mW
  • 1000-foot repeater range (open air)
  • Snap-track or DIN rail mounting
Specifications

Device Operation:

Supply Voltage :

 :RCV418 9 to 30 VDC @80mA or 17 to 31 VAC @0.5VA

 :RCV900 9-15 VDC @80 mA

Output:RS485 bus to a maximum of 127 "″Output Modules″"

 :Voltage BA/VOM-xx

 :Current BA/COM-xx

 :Setpoiint BA/SOM-xx

 :Thermistor BA/ROM-xxx

Relay :(DO) BA/RYOM (momentary, BA/RYOL (latching)

Indication:LED blinks on each reception

Mounting:DIN rail or 2 screws to back plane

 :Output modules plug into the right side of receiver

Wiring:1, RP-SMA antenna connection and 2 Power terminals, 22-16 AWG

Operating Temperature:32 to 140℉ (0 to 60℃)

Operating Humidity:5% to 95% RH non-condensing

Construction:ABS Plastic, UL94, V-0

Enclosure Rating:Indoor, NEMA 1

Dimensions:2.75″H x 4.8″W x 1.2″D, (7.0 x 12.0 x 3.0 cm)

Weight:0.5 lb (0.2 kg)

Warranty:2 year

Radio/Radio Receiver:

Protocol:Proprietary (Point Six)

Frequency:418 MHz or 902 MHz (order specific)

 :RCV418 418 MHz, Direct reception NO repeater

 :RCV900 902 MHz, Requires a repeater to be in the system

Modulation :418 MHz -Frequency Modulation

Receiver Sensitivity:-110 dBm

Open Air Range:RCV418 = 100ft from all transmitters, (Open air)

Low Battery Indication:None

Transmission time:20ms

Antenna:External 418 MHz or external 900 MHz

Channels:RCV418 = 1, RCV900 = 7

Device Addresses:100 transmissions per minute

Programming:Push button on ″Transmitter/Output Module″ simultaneously

Repeater Capable:RCV900 only

Approvals:RoHS

Certifications