• 1-100hp @ 460v, 1-40Hp @ 208/230V

• Keypad with simple LED display

• Standard communications inlcude, BACnet, Metasys N2 or Apogee P1

• RHT (Reduced Harmonic Technology)

• NEMA Type-1 conduit kit for direct wall mounting option

• Remote keypad kit accessory

• Smoke purge

• Damper control

• Automatic restart configuration

• Auto-tuning

• Integrated PID regulator with preset references and automatic/manual mode

• Automatic ramp adaptation, ramp switching, and ramp profile

Supply Voltage:208 VAC ±15%, 230 VAC ±10%, 460 VAC ±10% Three phase

Current Rating:Limit 150% of nominal device full load amperage (FLA) for 60s

Frequency: 50 Hz -5% to 60 Hz +5%

Horsepower: 1-100 Hp (model specific)

Acceleration Time:0.1s to 999.9s (adjustable in 0.1s increments)

Deceleration Time:0.1s to 999.9s (adjustable in 0.1s increments)

Altitude Limits:3300 ft (100m) maximum without derating

Efficiency: Greater than 98% at full load

Analog Input: 2; VIA 4 to 20mA or 0V to 10V, VIB 0V to 10V, 250 ohms

Inputs: 3 multi-function programmable logic inputs

Analog Output:1; 4 to 20mA or 0V to 10V selectable, 970 ohms

Outputs: 1 fault relay

 :1 assignable SPST (N.O.) relay

 :2A @ 250VAC/ 30VDC

Communication Protocol:

RS485 (Standard):Modbus™ , BACnet®, Metasys® N2, Apogee® P1

Card (option):Lonworks®

Communication Ports:RJ45

Display: LED Keypad with self diagnostics with fault messages in three languages

Operating Humidity:95% non condensing, IEC 60068-2-3

Operating Temperature:14° to 104℉ (-10° to 40℃) without derating

Storage Temperature:13° to 158℉ (-25° to 70℃)

Enclosure Rating:NEMA 1 when used with the Type 1 conduit kit

Approvals: Pollution degree 2 per NEMA ICS-1 and IEC 60664-1 UL Listed per UL508C Class 10 and 20 Conforms to NEMA, IEC, NFPA, ISO9001, UL file # E116875

Warranty: 18 months