APDAS Addressable Switches Series
Kele AutoPhos Addressable Switches
The APDAS Addressable Switches Series is designed for the AutoPhos series of lighting panels and the AutoPhos APK kits. The APDAS switches series provides the means to a simple 4-wire cable network of low voltage switches. This eliminates the need for a home run from each switch back to the lighting controller.
Significantly less wire is required to be run and maintained when utilizing a APDAS Network as compared to a traditional wiring; thereby reducing installation costs by eliminating the need for multiple low voltage and line voltage home run wiring.
Simply connect a four-conductor cable for power and communication from the AutoPhos controller and daisy-chain to each APDAS switch.
- Addressable switch eliminates low voltage home runs
- Switches reside on a single network
- Bicolor LEDs indicate status
- Up to 60 addressable switches per lighting panel
- AutoPhos and APK come complete with the APDS interface
- Address is set by an 8 position DIP switch
Electrical
Supply:24VDC
Status LEDs:LEDs are provided for diagnostics; Transmit (red), Receive (green), Busy (yellow)
Network:Transient protected two-wire differential signaling.
Recommended cable
• Belden 1502P, 4-wire cable
• Signal wires 2 x 22 AWG twisted
• Power wires 2 x 18 AWG
Environmental
Operating Temperature:32º to 125ºF
Operating Humidity:20% - 95% RH, Non-condensing
Mechanical Dimensions
APDAS1 and APDAS2:1.75W x 4.19H x 1.50D
Mounting:Designed to mount in a standard single gang wall switch electrical box.
User Interface:One or two 0.6 square LED Illuminated momentary push-button switches. Red when lights are on and Green when lights are Off.
Dip Switch:The switch controls a lighting group which is selected using an 8 position DIP switch.
Warranty:2 years
