Site Search
Price Check
 
Quick Order
Product Info
Copy & Paste
Type It In
Enter one item per line:
Qty[TAB or COMMA]Item #
Quick Order
Quick Order


Category Icon
Lighting Controls

Product Bar End
Product Bar End
AutoPhos
 
Product Information
 
 
Autophos(2)
Kele Lighting Control Panel
arrow
Description
AutoPhos Series BACnet/N2 native relay panel is built for integration with building automation systems to eliminate the problems experienced with standalone
lighting control systems. The AutoPhos can be shipped completely factory assembled or it can be shipped with the can ahead and the interior later.
This product also features the latest relay technology for superior relay life, manual override and individual relay replacement. The quantity of relays can be customized in each relay panel by ordering the desired amount of APR20 relays.
arrow
Features
  • BACnet MSTP and Metasys N2 included
  • Microprocessor-based controller
  • Up to 56 switch inputs per panel
  • Up to 48 relay outputs per panel
  • All output relays are magnetically held
  • Up to 255 panels per network
  • Direct manual-override switch on each relay
  • Can be set-up and programmed from the BAS or from a laptop
  • On-board switch settings allow for network address selection
  • Optional Windows®-based software for easy setup and commissioning (USB)
  • Programmable inputs, output priorities, flash warning, relay energize time, output sequencing, and software grouping
  • Flush- or surface-mounted enclosure
  • Removable terminal blocks and electronics
  • Easy Installation and operation
  • Autophos Pay Back Estimator - Autophos Payback Calculator (If you are not able to open link, right click and save to your desktop or email info@kele.com for assitance.)
arrow
Specifications
Panel power supply:115/277 VAC ±10%, 60 Hz, 30 VA
Communications:Network ready, two-wire RS-485
Switch inputs:56 dry contact, 56 2-wire or 28 3-wire 24 VDC momentary or maintained
Output relays:8, 16, 32, 48; SPST mechanically latched; 20A, 120 VAC tungsten; 20A, 277 VAC ballast
Relay life:2 million+ on/off cycles @ no load; 300,000 on/off cycles @ full load
Output terminals:14-8 AWG solid or stranded wire
Operating temp:32º to 125ºF (0º to 52ºC)
Operating humidity:20% to 95% RH noncondensing
Agency approvals:Complete system UL-916, CSA, CEC, ISO 9001
Enclosure dimensions
  8-relay:17.2H x 16.6W x 5.1D (43.7 x 42.2 x 13.0 cm)
  16-relay:22.3H x 16.6W x 5.1D (56.7 x 42.2 x 13.0 cm)
  32-relay:31.1H x 16.6W x 5.1D (79.0 x 42.2 x 13.0 cm)
  48-relay:39.9H x 16.6W x 5.1D (101.3 x 42.2 x 13.0 cm)
Warranty:2 years

arrow
Certifications
BACnet