EnGenius - Patent Pending

• NEMA 4 enclosure standard

• KWH Accuracy class 0.5% ANSI C12.20 For meter alone with unmatched CT's OR for Meter-CT set with factory calibrated matched CT's

• Data port for setup and trend retrieval

• Measure voltages up to 32000 VAC (*voltages over 600VAC require the use of a potential transformer, not included)

• Supports 0.333V safe CTs and 5 AMP CTs (must use optional 5 AMP adapter board)

• BACnet MSTP, Lonworks, N2 and Modbus RTU available

• Password protected configuration

• Powered by separate 24 VAC supply

• On board data logging

• Auto configuration

• Upgradable firmware through data port

• Bidirectional power measurement

• CSI approved

Supply Voltage: 24 VAC ± 10% 60Hz

Supply Current: 250 mA maximum

Monitored Voltage: Line to Line: 120 to 600 VAC; Line to Line with potential transformer: 601 to 32000 VAC

Monitored Current: 5 to 6000A using current transformers

System Type: 2-Wire Single Phase; 3-Wire Single Phase; 4-Wire Wye; 3-Wire Delta; 4-Wire Delta

Communication: Data Port: Serial interface to EnGenius™ Desktop Software - OPTIONAL Communications (not field installable): BACnet MS/TP; Lonworks; Modbus RTU; N2

Analog Output: 1 Output; Type: 4-20 mA (loop powered); Accuracy: 0.5% full scale; Maximum Loop Supply Voltage: 30 VDC; Maximum Impedance: 850Ω @ 24 VDC

Digital Output: 2 Outputs; Type: Optically isolated solid state FET switch; Rated Voltage: 28 VAC/40 VDC maximum; Rated Current: 00 mA maximum

Operating Temperature: -22° to 158℉ (-30° to 70℃)

Operating Humidity: 0 to 95% (non-condensing)

Enclosure: NEMA 4, UL94 rated 5VA

Dimensions: 6.5” x 6.5” x 4” (16.5 x 16.5 x 10.1 cm)

Weight: 3.1 lb (1.4 kg)

Approvals: ETL, CE File #4004284

RoHS Statement: Yes

Warranty: 1 year